The Ford Barn - View Single Post

V8ER · 03-05-2017, 04:23 PM

1 1/4" wide x 2 15/16" long. They go in the floor channel which is on the descending side of the frame beyond the rear axle so they have a sloping side. The height on one side is 1 3/16" and on the other side is 2". There is a 7/16" hole for the bolt. These blocks are a left and a right, so the hole is in 1 1/16" from one end for one side, and 1 1/16" in from the other end for the other side.

03-05-2017, 04:23 PM	#11
V8ER Senior Member Join Date: May 2010 Location: near Pittsburgh, PA Posts: 403	Re: 35/36 rear floor cross member 1 1/4" wide x 2 15/16" long. They go in the floor channel which is on the descending side of the frame beyond the rear axle so they have a sloping side. The height on one side is 1 3/16" and on the other side is 2". There is a 7/16" hole for the bolt. These blocks are a left and a right, so the hole is in 1 1/16" from one end for one side, and 1 1/16" in from the other end for the other side.