The Ford Barn - View Single Post

DavidG · 07-30-2019, 06:28 PM

The roller bearing isn't difficult to install with the right bearings and once you have the tube removed and the all of the old rubber removed. Some suppliers of the bearing set up specifically for this purpose have components that are slightly oversize and have to be unduly forced into the steering column tube, especially in '32 tubes. Ask for the outside diameter dimensions before buying.

07-30-2019, 06:28 PM	#9
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: 32 stock v8 tudor steering very hard The roller bearing isn't difficult to install with the right bearings and once you have the tube removed and the all of the old rubber removed. Some suppliers of the bearing set up specifically for this purpose have components that are slightly oversize and have to be unduly forced into the steering column tube, especially in '32 tubes. Ask for the outside diameter dimensions before buying.