The Ford Barn - View Single Post

skidmarks · 07-27-2019, 10:02 AM

If you have a lathe, make a pilot to fit the box and you can cut the stock flange off with a hole saw for a nice fit. Then make a new flange from flat bar to fit.

Tack it in place with the body on to get the angle to fit.

07-27-2019, 10:02 AM	#3
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,735	Re: F1 steering in a Model A If you have a lathe, make a pilot to fit the box and you can cut the stock flange off with a hole saw for a nice fit. Then make a new flange from flat bar to fit. Tack it in place with the body on to get the angle to fit.