Re: 1935 Ford Frame
On my 1937 chassis, I used the hole pattern from the right hand X member to locate the oval hole for the pedals on the left side after repairs. Three of the pedal bracket mounting holes still existed, so I used the pedal bracket to locate the forth hole. Does your X member have the holes for RHD pedals or has that side been modified also?
Another pedal hole enlargement hole project gone horribly wrong. That is the way I received the frame, I am not claiming that modification.
Note the frame is upside down in the photos.
Last edited by Zeke3; 11-29-2021 at 06:27 PM.
Reason: Added photos
|