View Single Post
Old 03-19-2011, 10:42 AM   #23
mickeyb
Member
 
mickeyb's Avatar
 
Join Date: May 2010
Location: arlington tn
Posts: 68
Default Re: Not getting fire!! Won't start. PLEASE HELP FAST!!

start with coil go backwards
remove small wire that goes to dissy,check for voltage from coil where you removed the wire to ground,if you have voltage there, use a wire to go from coil to ground put it on and off coil should spark.if it does spark then you have dizzy problems
mickeyb is offline   Reply With Quote