Re: Hole saw
Its called 'annular' Maybe not spelled right available from any industrial tool like Victor
Shars maybe ebay. Then way back with a spark plug adaptor they pumped grease
in there "valves closed" better buy a case of grease tubes, not to mention shop rags
for the mess but it really does work. So for 15 min. just braze a zerk on a cleaned out
spark plug. pump the grease gun >> the power of hydraulics is amazing just pump
no. 2 hole and no. 3 hole and watch......bingo " it lifted a Scotch remove grease fitting
couple nuts wind head back down I hate snake oil but go for your choosing to spray some on all studs. No drilling no hy teck stuff just real time science and no damage...
"the head didn't grow in there"
Last edited by big job; 11-15-2020 at 10:26 AM.
|