The Ford Barn - View Single Post

oldford2 · 12-28-2013, 01:48 PM

Bubba,
I am all for it if it is directed at the small time mechanics. If gets too technical in electronic terms it may be beyond me. Also if it instructs using scopes and testing machines, 99% of us don't have that equipment. So it will be a challenge to you to make it helpful to many of us who need an introductory lesson on electricity basics. What happens to that measly 4 1/2 volts from the resistor to end with the high voltage at the plug? A mystery to me. Good luck.
John
John

12-28-2013, 01:48 PM	#37
oldford2 Senior Member Join Date: May 2010 Location: pittsfield, MA Posts: 2,086	Re: Distributor videos ? Bubba, I am all for it if it is directed at the small time mechanics. If gets too technical in electronic terms it may be beyond me. Also if it instructs using scopes and testing machines, 99% of us don't have that equipment. So it will be a challenge to you to make it helpful to many of us who need an introductory lesson on electricity basics. What happens to that measly 4 1/2 volts from the resistor to end with the high voltage at the plug? A mystery to me. Good luck. John John