The Ford Barn - View Single Post - need 30-31 roadster measurement

dudley · 03-18-2015, 04:01 PM

Thanks MAG , but the measurement I need is inside, behind the seat where the quarter meets the center panel in front of the deck lid. it should be somewhere between 23 3/4 and 25 inches. I am installing the rain gutter to wheel well supports and I can move that flange up and down about 1 1/2 inches. this is the flange that the tack rail set on. Right now i have the distance from the flange down to the top of the sub rail at 24 1/4 but I would like to be sure before I drill holes and rivet the support in. That front support is what holds that distance.

03-18-2015, 04:01 PM	#4
dudley Junior Member Join Date: May 2010 Location: saginaw county michigan Posts: 4	Re: need 30-31 roadster measurement Thanks MAG , but the measurement I need is inside, behind the seat where the quarter meets the center panel in front of the deck lid. it should be somewhere between 23 3/4 and 25 inches. I am installing the rain gutter to wheel well supports and I can move that flange up and down about 1 1/2 inches. this is the flange that the tack rail set on. Right now i have the distance from the flange down to the top of the sub rail at 24 1/4 but I would like to be sure before I drill holes and rivet the support in. That front support is what holds that distance.