Thread: Rear End Dolly
View Single Post
Old 08-08-2019, 10:24 PM   #6
daveymc29
Senior Member
 
daveymc29's Avatar
 
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,313
Default Re: Rear End Dolly

I might make one to put my B/W back in the coupe. I like the helical cut gears in the B/W. I have a Mitchell in my roadster and am making a change from 3:78 to 4:11 in my coupe to see how I like the combo of 33% O/D and 4:11. Seems it might pull the Sierras a bit better than the roadster with 3:54 and 26% Mitchell. Would have used a Laycock if I could have found a 33% one. (Hens teeth, those ones)
I need to make the dolly real low as I need to clear the air conditioning condenser which is behind the banjo a few inches. Maybe some low rolling casters like on some chairs? I'll look into it.

Last edited by daveymc29; 08-08-2019 at 10:31 PM.
daveymc29 is offline   Reply With Quote