The Ford Barn - View Single Post

russcc · 01-26-2020, 07:52 AM

I have clayed the heads, (Navarro), on the 59L to get an idea of the clearance w/out the gasket. Now I plan to use foil balls to measure piston & valve clearance so I can measure it with a mike. How do you stick or keep the foil ball in place on the head, pistons or valves. Thank you Fordbarners.

01-26-2020, 07:52 AM	#1
russcc Senior Member Join Date: May 2010 Posts: 2,871	Foil balls for clearance I have clayed the heads, (Navarro), on the 59L to get an idea of the clearance w/out the gasket. Now I plan to use foil balls to measure piston & valve clearance so I can measure it with a mike. How do you stick or keep the foil ball in place on the head, pistons or valves. Thank you Fordbarners.