The Ford Barn - View Single Post - 2 door phaeton project, how much is it worth

Dave Slater · 07-22-2018, 03:24 AM

From the photos attached it's a real Tudor phaeton and it was a right hand drive delivered car. Have a look at the front doors as they are framed in timber where as the USA delivered standard phaetons front doors were all steel. Also have a look at the belt molding at thr rear of the car as it goes around the rear tub - totally different from a standard 4 door phaeton. There should also be a body tag riveted to the cowl close to the glass petrol bowl and the body tag should read 159-xxxx. Without looking up thr records from Steve Pluckers book total production was around 7000 units. A very desirable body style with only about 250 left in the world. Dave. PS there are only 4 in Australia.

07-22-2018, 03:24 AM	#23
Dave Slater Senior Member Join Date: Dec 2011 Location: Country Victoria Australia Posts: 130	Re: 2 door phaeton project, how much is it worth From the photos attached it's a real Tudor phaeton and it was a right hand drive delivered car. Have a look at the front doors as they are framed in timber where as the USA delivered standard phaetons front doors were all steel. Also have a look at the belt molding at thr rear of the car as it goes around the rear tub - totally different from a standard 4 door phaeton. There should also be a body tag riveted to the cowl close to the glass petrol bowl and the body tag should read 159-xxxx. Without looking up thr records from Steve Pluckers book total production was around 7000 units. A very desirable body style with only about 250 left in the world. Dave. PS there are only 4 in Australia.