The Ford Barn - View Single Post

Karl Wolf · 05-09-2021, 03:48 PM

Mitchell Overdrive was kind enough to cut splines on a solid shaft for me,
might have been around 15 years ago. The turn around time is dependent
on their timing. They do a bunch all at once. Then not.
Karl

05-09-2021, 03:48 PM	#22
Karl Wolf Senior Member Join Date: May 2010 Location: Mill Valley,Ca. Posts: 1,509	Re: Torque tube shortening recommendations Mitchell Overdrive was kind enough to cut splines on a solid shaft for me, might have been around 15 years ago. The turn around time is dependent on their timing. They do a bunch all at once. Then not. Karl