The Ford Barn - View Single Post - Stromberg S-jet

Terry,OH · 09-05-2019, 06:08 PM

Tim: I am not aware of brass needles for the inlet valves unless they are Vitron tiped. The body is brass but the all metal needles are steel.
The original Ford or the early reproduction inlet valves with all metal needle and seats work great if your looking for a replacement.

09-05-2019, 06:08 PM	#14
Terry,OH Senior Member Join Date: May 2010 Posts: 4,752	Re: Stromberg S-jet Tim: I am not aware of brass needles for the inlet valves unless they are Vitron tiped. The body is brass but the all metal needles are steel. The original Ford or the early reproduction inlet valves with all metal needle and seats work great if your looking for a replacement. Last edited by Terry,OH; 09-05-2019 at 06:14 PM.