The Ford Barn - View Single Post - Zenith Carburetor linkage sticking and stiff

Jack Shaft · 05-26-2020, 10:04 PM

The model A engine and transmission are supported by two box style mounts at the rear and a single 'wishbone'
Style mount at the front..on the back of the transmission is a trunnion that allows the rear suspension to oscillate.Problem is 90 year old box mounts crack,the rubber degrades and the trunnion wont hold it,allowing engine sag...frames sag as well.

05-26-2020, 10:04 PM	#17
Jack Shaft BANNED Join Date: Dec 2019 Posts: 1,196	Re: Zenith Carburetor linkage sticking and stiff The model A engine and transmission are supported by two box style mounts at the rear and a single 'wishbone' Style mount at the front..on the back of the transmission is a trunnion that allows the rear suspension to oscillate.Problem is 90 year old box mounts crack,the rubber degrades and the trunnion wont hold it,allowing engine sag...frames sag as well.