The Ford Barn - View Single Post

Ol' Ron · 10-28-2020, 12:19 PM

The 00jr cam will have only 375/380 lift. The 400 jr has aprox 390 ;ift, and varies abit depending who grinds them. The one I used in the stock car cam from Isky I hope.

10-28-2020, 12:19 PM	#10
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,855	Re: Engine Problem The 00jr cam will have only 375/380 lift. The 400 jr has aprox 390 ;ift, and varies abit depending who grinds them. The one I used in the stock car cam from Isky I hope. Last edited by Ol' Ron; 10-28-2020 at 10:06 PM.