View Single Post
Old 05-24-2012, 07:15 AM   #177
Vic Piano
Senior Member
 
Vic Piano's Avatar
 
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
Default Re: What I Did on My Lunch Hour

Grease Question

When we rebuilt the LZ’s transmission, I installed an NOS U joint and new gaskets. I packed the U joint with Corn Head grease and, after assembly I pumped more grease into the housing. Everything is working well except that after driving the car and letting it sit overnight, I’m finding little Corn Head “gifts” on the garage floor. I’ve driven the LZ about 500 miles and the other day, after finding more grease on the floor; I pumped almost a full tube of Corn Head grease into the housing. This grease is “low Temp” so that it lubricates the U joint instead of just coating the interior of the housing through centrifugal force. I have not been able to identify the area that the grease is leaking from and I’m wondering if packing the U joint will just become another part of normal maintenance only on a more frequent basis… Have any of you had a similar experience using Corn Head Grease
__________________
Imagination is more important than knowledge.
Vic Piano is offline   Reply With Quote