View Single Post
Old 11-17-2019, 02:18 PM   #8
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: Float gauge for Holly 1901 carb

As stated in my post #2 above, 1/2" from top of chamber.
I never did it with water as it is a different density than gasoline and will give false results.
The toe end is furthest from the valve arm.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES

Last edited by 51 MERC-CT; 11-17-2019 at 02:33 PM.
51 MERC-CT is offline   Reply With Quote