Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by BRENT in 10-uh-C
None, because the front should just have the rubber pad underneath. If you recall, there is a metal upper and lower piece there that just used wood sandwiched between. Because we fabricate the blocks to the original print on the rest of them, we are generally close. Also, I cannot remember the exact thickness but the original anti-squeak pads used a cotton reinforced pad, and the repros are not the same thickness on those either.
|
Thanks, I'll start with just the rubber pad under the cowl and try the hood for fit then work my way towards the back, thanks for the tips.