The Ford Barn - View Single Post

5lugnuts · 05-14-2018, 10:22 AM

The pedals and floor boards can stay if you remove the sector gear and housing before sliding the unit out. Same going back.

If you adjust the box on the bench you are going to have to do it again after installing it anyway because of clamping forces when the box is bolted back to frame.

05-14-2018, 10:22 AM	#7
5lugnuts Senior Member Join Date: Aug 2015 Location: Clermont in Central Florida Posts: 111	Re: steering box and shaft removal The pedals and floor boards can stay if you remove the sector gear and housing before sliding the unit out. Same going back. If you adjust the box on the bench you are going to have to do it again after installing it anyway because of clamping forces when the box is bolted back to frame.