The Ford Barn - View Single Post

Ray in La Mesa · 05-13-2018, 10:43 PM

If you are removing only the horn rod you can loosen the steering box, unclamp at gas tank and tilt/aim the steering column towards the drivers door to slide the horn rod out. If you are removing the whole steering column & box, you can feed it out through the bottom, after removing the horn rod & steering wheel, by snaking the spark & throttle levers out between the brake & clutch pedals by alternately moving the pedals.

05-13-2018, 10:43 PM	#3
Ray in La Mesa Senior Member Join Date: May 2010 Location: La Mesa Ca Posts: 1,166	Re: steering box and shaft removal If you are removing only the horn rod you can loosen the steering box, unclamp at gas tank and tilt/aim the steering column towards the drivers door to slide the horn rod out. If you are removing the whole steering column & box, you can feed it out through the bottom, after removing the horn rod & steering wheel, by snaking the spark & throttle levers out between the brake & clutch pedals by alternately moving the pedals.