The Ford Barn - View Single Post

pinball73 · 11-21-2017, 10:04 PM

Kohnke did not check for twisted or bent rod, generally they all looked the same, laid out flat, but that is about as far as I went there. as for wrist pin clearance, the machine shop took care of all that I presume when they put in the new wrist pin bushings, they are supposed to be good & I trust them!

11-21-2017, 10:04 PM	#19
pinball73 Senior Member Join Date: Nov 2017 Location: North mo. Posts: 106	Re: Noise in my ney 29 a engin Kohnke did not check for twisted or bent rod, generally they all looked the same, laid out flat, but that is about as far as I went there. as for wrist pin clearance, the machine shop took care of all that I presume when they put in the new wrist pin bushings, they are supposed to be good & I trust them!