Quote:
Originally Posted by tommyleea
... Since I have a gen light and not amp gauge, I have power to one wire, and the other wire goes to the armature terminal of the regulator. Is this correct? I can't believe that there isn't a diagram for the gen light, but I have yet to fine one..Thanks
|
That description matches the '55 (Bird) wiring diagram I have.
A (Black/green stripe) wire from the Ignition/run position of the key switch goes to one side of the Gen bulb. The other (Yellow/black stripe) wire on the Gen bulb socket goes to the Armature terminal on the voltage regulator.