Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Newc
Well; Have some good progress to show. Proceeded with the fitting and started with the A pillars fit- looked good and the windshield dimensions were right so the A pillars got tacked. Put on the junker doors and a Big OH NO! B pillars were 3/8" to short! Spliced in some extra B pillar material and the doors FIT. Even the revel lined up!
|
If you used FORDOR front doors on the coupe....well FORDOR and COUPE doors are the same, EXCEPT at the upper, rear corners. The sedan doors are roughly 5/16"- 3/8" or so taller because of the longer, rearward-rising slope on a sedan roof, as compared to a coupe. You can see the difference below. It's amazing what you ARE accomplishing, though!! DD