The Ford Barn - View Single Post

steve tansy · 06-23-2014, 06:09 PM

THANKS, Martin, sorry for the mix up on my end your right .125 less than from .179 is .1054 4 inch stroke right on.Thanks again you have help me veary much .Steve

06-23-2014, 06:09 PM	#187
steve tansy Junior Member Join Date: Nov 2011 Posts: 5	Re: Boring a flathead THANKS, Martin, sorry for the mix up on my end your right .125 less than from .179 is .1054 4 inch stroke right on.Thanks again you have help me veary much .Steve __________________ v8fhtoys