The Ford Barn - View Single Post

rotorwrench · 10-19-2019, 10:37 AM

The distance from the top of the axle I-beam to the bottom at the perch points also changed which would affect the fit up of the wishbone. Model A axles are still out there. I've purchased a lot of them looking for straighter ones than ones I had. It would be a lot easier to just replace it.

10-19-2019, 10:37 AM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,436	Re: Early V8 axle under Model A front end The distance from the top of the axle I-beam to the bottom at the perch points also changed which would affect the fit up of the wishbone. Model A axles are still out there. I've purchased a lot of them looking for straighter ones than ones I had. It would be a lot easier to just replace it.