The Ford Barn - View Single Post

walkerlakeprinter · 08-13-2019, 01:27 PM

Success! Windshield is back in and closes/opens ok. Needs a little help in closing, but that should work itself out. I used a bit of super glue to tack the hinge gasket to the hinge, then drilled holes in the rubber for the bolts. The rubber held one of the middle bolts far enough for me to lift the windshield into place and put a nut on it to told it while I propped it up to get the rest of the bolts in.

08-13-2019, 01:27 PM	#16
walkerlakeprinter Senior Member Join Date: May 2010 Location: Walker Lake, Nevada Posts: 304	Re: Windshield gasket replacement Success! Windshield is back in and closes/opens ok. Needs a little help in closing, but that should work itself out. I used a bit of super glue to tack the hinge gasket to the hinge, then drilled holes in the rubber for the bolts. The rubber held one of the middle bolts far enough for me to lift the windshield into place and put a nut on it to told it while I propped it up to get the rest of the bolts in.