The Ford Barn - View Single Post - Model A motor froze-up

48fordnut · 12-19-2013, 10:24 AM

Morning all,
Well the saga continues. It started with #4 cyl ,with fluid in the tops of all cyl, when I went out and uncovered the eng fluid had leaked down in #4. Well ,I kept on with the light tap with the hammer till, it was #3, then finally #2. Now that #1 is being a bit stubborn. I have a 1 7/16 socket on the ft nut ,but can't get any leverage.
Bit cold this am, but will go thru the ritual in a few minuites. Will keep you posted.

12-19-2013, 10:24 AM	#212
48fordnut Senior Member Join Date: Sep 2010 Location: warner robins ga 31088 Posts: 494	Re: Model A motor froze-up Morning all, Well the saga continues. It started with #4 cyl ,with fluid in the tops of all cyl, when I went out and uncovered the eng fluid had leaked down in #4. Well ,I kept on with the light tap with the hammer till, it was #3, then finally #2. Now that #1 is being a bit stubborn. I have a 1 7/16 socket on the ft nut ,but can't get any leverage. Bit cold this am, but will go thru the ritual in a few minuites. Will keep you posted.