The Ford Barn - View Single Post

Benson · 12-28-2019, 07:51 PM

Installation tip to prevent cracking flywheel housing.

It is a good idea to remove all FOUR bolts from mounts (loosening them still puts strain on housing) that hold the rear engine mounts to the flywheel housing BEFORE jacking up the front of engine.

Only jack up the amount needed.

12-28-2019, 07:51 PM	#4
Benson Senior Member Join Date: May 2010 Posts: 2,591	Re: Front motor mount springs wrong Installation tip to prevent cracking flywheel housing. It is a good idea to remove all FOUR bolts from mounts (loosening them still puts strain on housing) that hold the rear engine mounts to the flywheel housing BEFORE jacking up the front of engine. Only jack up the amount needed. Last edited by Benson; 12-29-2019 at 09:51 PM.