Re: Engines stuck
Looks 26-27 to me.
Normally i just end up pushing the pistons all the way out of the bores & give them a hone. Easier than trying to force all 4 to move at once.
Looks like you have the strongest factory crankshaft too, try not to damage that.
As for rebuilding the coils. I can give you a helpful hint. If the secondary appears burnt through somewhere, they're often 2 separate windings so you can mix & match the ones that still work.
__________________
<Link> This is how we roll<Link>
"I'm Convinced that no one really reads posts anymore; they just fabricate what they think the post says then ramble on about red herrings."--Bob
Outcasts rules of old cars
#1 Fun is imperative, mainstream is overrated
#2 If they think it is impossible, prove them wrong
#3 If the science says it impossible you are not being creative enough.
#4 No shame in recreating something you never had
#5 If it were not for the law & physics you would be unstoppable
|