The Ford Barn - View Single Post - Steering lube- Penrite 1200W

wrndln · 03-28-2018, 11:41 AM

I used the end plate with the tube attached for a supposed fix for leaking. After installing the tube/end plate, the steering box still dropped to much. I was about ready to put John Deere corn-head grease in the 7 sector box. However I decided to try one more fix before the corn-head grease after several attempts with Permatex on the small bolts on the bottom to stop the dropping. I got some heavy cotton thread from my wife's sowing basket and wrapped 12 or 15 rounds of thread just under the bolt heads. No leaks since.
Rusty Nelson

03-28-2018, 11:41 AM	#42
wrndln Senior Member Join Date: May 2010 Location: Lakeville, MN Posts: 5,164	Re: Steering lube- Penrite 1200W I used the end plate with the tube attached for a supposed fix for leaking. After installing the tube/end plate, the steering box still dropped to much. I was about ready to put John Deere corn-head grease in the 7 sector box. However I decided to try one more fix before the corn-head grease after several attempts with Permatex on the small bolts on the bottom to stop the dropping. I got some heavy cotton thread from my wife's sowing basket and wrapped 12 or 15 rounds of thread just under the bolt heads. No leaks since. Rusty Nelson