Been working on the rear end, drain old oil from rear end, clean up, working on the brakes and free up all brake parts.
.
.
Removed two of the rear shocks, this is so I can install the two gussets with new cage nuts, after they are installed new gas tank.
.
.
Removed the brake/clutch pedal assembly and cleaned up, will have to get the bushing so I can correct play, also removed and cleaned up the steering column and installed new top bushing in column, lots of grease and crud. Made a "special washer" that was used to beef up frame, this made the bolts make up correctly. Always appreciate Fordbarns viewing and making comments on what to do and correct.
.
.