Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by cas3
the bolt pattern on your 36 spindle to mount any of the hydraulic backing plates 39-48 are different than the 37 - 48 pattern spindles. so, if you are a good metal fabber, it could be done. most folks change spindles to fit the hyd. backing plates, and then of coarse your 36 front drums would not work with the newer spindles
|
OK, I think I’ve got it,
I knew about the spindles being different and that you can buy an adapter kit for hydraulic backing plates and a bearing spacer to use later model drums. The backing plate bolt pattern needs to be modified to use the kit. I was not sure if you could use the hydraulic backing plates with 36 spindles and 36 brake drums. Sounds like there might be a compatibility issue with the 36 drums using hydraulic backing plates even if you have 36 Spindles?
Sent from my iPad using Tapatalk