[grumppyoldman]

OK guy's I just finished checking everything with the front end off the slab, everything just hanging, the only thing I could detect was the passenger side king pin has a very little movement, drivers side good and tight. Like I said before, I replaced the king pins with the kind that have the needle bearings. When I had the tires balanced and rotated, they put 32 lbs. air in them. I let the air out to 28 lbs. and drove it, it starts wobbling at 60 and stopped at 75, before the balancing, rotation and air change it started wobbling at 55 mph and stopped just past 65 mph. Going to see if there is a shop around here that still does king pin work since I don't have a reamer to do the bushings.