The Ford Barn - View Single Post - Need to re-torque head, but socket is too fat

jw hash · 05-09-2020, 11:59 AM

yes it will foul up the torque. and they can round out the hex nuts. on the out let, if you have a old 11/16" socket, just grind it down.

05-09-2020, 11:59 AM	#7
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Need to re-torque head, but socket is too fat yes it will foul up the torque. and they can round out the hex nuts. on the out let, if you have a old 11/16" socket, just grind it down.