The Ford Barn - View Single Post

51 MERC-CT · 04-01-2021, 02:51 PM

Have had an Eastwoods Tig 200 AC/DC for a number of years.
It's like anything unfamiliar in that you have to use it to find out how.
I have always had good results on Aluminum, steel and stainless.
The only thing is that when I got mine it did not come with Gas lens/diffuser tips.
That's what you should get for better gas diffusion if you choose to buy the unit.

04-01-2021, 02:51 PM	#8
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: TIG welder recomendations Have had an Eastwoods Tig 200 AC/DC for a number of years. It's like anything unfamiliar in that you have to use it to find out how. I have always had good results on Aluminum, steel and stainless. The only thing is that when I got mine it did not come with Gas lens/diffuser tips. That's what you should get for better gas diffusion if you choose to buy the unit. __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 04-04-2021 at 02:36 AM.