The Ford Barn - View Single Post

Mart · 05-19-2014, 10:20 AM

The pump drive gear shouldn't stop the cam from being timed properly. Try pulling the cam out just enough to clear, turn the crank one tooth to the right and slide the cam back in. you can then turn the cam and crank one tooth to the left and they should be perfectly lined up.

Mart.

05-19-2014, 10:20 AM	#2
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,760	Re: Puzzling cam swap issue.... The pump drive gear shouldn't stop the cam from being timed properly. Try pulling the cam out just enough to clear, turn the crank one tooth to the right and slide the cam back in. you can then turn the cam and crank one tooth to the left and they should be perfectly lined up. Mart.