Quote:
Originally Posted by Lawrie
Kevin,the ones with soft end plates WILL let the rollers eat into the end plates,then the little pin part of the roller will eat into the hub and generate a pile of hard filings that will turn the grease to grinding paste,I know from experience to only use nos or good original ford ones,
Lawrie
|
Lawrie, I agree with you for sure. Genuine FORD marked bearings are hard to find now. Another very good brand was HYATT made in the USA. I think they may have made the Ford marked bearings. Don't get too much red dirt in your 33 Ford. Have a great holiday. Regards, Kevin.