The Ford Barn - View Single Post

CT Jack · 03-10-2022, 08:34 AM

You said you changed distributors. When you installed the ignition switch cable into the distributor body did you screw it in all the way? If it is too far into the distributor body it could be making contact causing the points to be grounded. This would prevent the spark plugs from firing.

03-10-2022, 08:34 AM	#18
CT Jack Senior Member Join Date: May 2010 Location: Hebron, CT Posts: 433	Re: No spark at the plugs You said you changed distributors. When you installed the ignition switch cable into the distributor body did you screw it in all the way? If it is too far into the distributor body it could be making contact causing the points to be grounded. This would prevent the spark plugs from firing.