The Ford Barn - View Single Post

Synchro909 · 06-26-2019, 06:15 PM

SAJ, A stud brazed into one side of the clamp is one way to go - and a good one. I use a pair of helicoils in one side and a bolt through the other. I figure we do the same thing but different!!
I've had to tweak the pedal a smidge once or twice but I haven't adjusted the clutch to compensate for the reduced pedal movement. While it's working, I'll leave well enough alone.

06-26-2019, 06:15 PM	#10
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: 29 Clutch Problem SAJ, A stud brazed into one side of the clamp is one way to go - and a good one. I use a pair of helicoils in one side and a bolt through the other. I figure we do the same thing but different!! I've had to tweak the pedal a smidge once or twice but I haven't adjusted the clutch to compensate for the reduced pedal movement. While it's working, I'll leave well enough alone. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.