Quote:
Originally Posted by Gold Digger
I think I've figured out how I'll use it in this B John Deere. I'll take the bottom radiator hose loose and put a elbow on there that stands straight up and at least as high as the top of the block. Then I'll drain the crankcase of oil and leave the plug out so any water leaking in there can drain out. What I don't know is how I will heat the block with the waterglass in it. And do I need to circulate what water I have in the block to make it work?
|
I have done this with a John Deere be before. Take the water plug out of the head install a hose barb in that hole I used a cheap pump that goes on electric drill and took the other end to the top of the radiator fired up the engine covered radiator and cover the front of the radiator so it would get good and warm when it got the temperature I added to water glass and I think you know what to do from there.
Sent from my SM-J700T using Tapatalk