[Bud]

I bought this cutoff Model B oil pan recently and realized I already have a B pan, so I am deciding to sell this. The B flywheel housing portion has been cut off. The flanges are straight and there is no rust in the pan. This comes with the oil dipper tray which has been painted. I was assured by the previous owner that the dipper tray has no pinholes. Please note that someone replaced the oil drain plug with a homemade plug made from a spark plug base. The homemade plug is larger in diameter and taller than the standard drain plug. The drain plug screws in and out fine--I don't see why it would not work. A spark plug base is 7/8" thread and the normal drain plug is 3/4" fine thread. I don't know why it was changed. This is approximately 16 lbs and is 10" x 24" x 12" in size. I could ship it at the buyers expense (my zip is 45845) but would prefer if the buyer simply pick it up. I am asking $75 for this pan, which is well worth it since it will save you the trouble of finding a B pan in the first place and cutting it down. Please check out the pictures and ask questions. If it does not sell here it will go to eB**y. Thanks for looking.