[rockfla]

I believe that the 41 is the same as back to 37...IF so there should be just two machine screws on either side of the coil and the condenser should come off with the coil. Some times they do get a little tight so once the machine screws are out just give it a little bump to one side with the palm of your hand and it should pop loose. Being that it is cracked is probably got it fitting extra tight. ALSO watch for the little spring and carbon tip on the end of the coil. Skip Haney down in Punta Gorda FL is the go to man for coils....his ad is in the V8 TImes if you're a member of the EFV8 Club. IF you still have trouble getting your coil off PM me and I will come over and help you!!! Once you have the coil off, put a small rag or paper towel in the the coil opening and take a scotch-brite pad and rub the inside lip of the coil and clean that surface real good and the coil will fit back in smoothly!!!