View Single Post
Old 05-07-2017, 08:42 PM   #8
drkbp
Junior Member
 
Join Date: Jun 2011
Posts: 16
Default Re: Really really old Acetylene tank?

That Prest-O-Lite you have has the old style fine valve on it. Folks that use a POL to run their gas headlights can just "crack" that valve open without using a regulator. These old POLs show up mixed in with the new style center valve B tanks.

There are a lot of these POL tanks out there so I just swap my empty POLs with AirGas or PraxAir when I need one for my '14. I prefer to use a small Uniweld regulator and it makes keeping the headlight flames adjusted easier. Western will fill those tanks as long as they can be certified.

Last time I got a tank from AirGas they had two in their stack. One was a fine valve and the other a modern coarse valve.
Attached Images
File Type: jpg 2015-12-18 B TANK PILE 2 3.jpg (163.2 KB, 28 views)
drkbp is offline   Reply With Quote