The Ford Barn - View Single Post

Ziggster · 10-18-2019, 10:57 AM

There are two different legths so be careful as length will depend on intake mtg surface height and fuel pump stand configuration/height. Suggest you also check first to make sure there are no mods made to the inside of the block where the rod is supposed to go.

10-18-2019, 10:57 AM	#3
Ziggster Senior Member Join Date: Aug 2018 Location: Ottawa, ON Posts: 851	Re: 52 Ford flathead fuel pump push rod There are two different legths so be careful as length will depend on intake mtg surface height and fuel pump stand configuration/height. Suggest you also check first to make sure there are no mods made to the inside of the block where the rod is supposed to go. Last edited by Ziggster; 10-18-2019 at 02:39 PM.