View Single Post
Old 01-31-2019, 02:04 PM   #15
29AVEE8
Senior Member
 
29AVEE8's Avatar
 
Join Date: Dec 2010
Location: Redlands, CA
Posts: 148
Default Re: Bendix Brakes Question

I don't know if this is your problem but I installed a '40 rear e-brake cable on the Lockeed brakes on the rear of my roadster. The cable I used came from C&G. The spring on the cable was much too long and very stiff. I ended up shortening it several times to get it to fit correctly but the wire diameter is much too large so the tension is too high. I talked with Mac VanPelt about this and he has the correct cable/spring. I am not knocking C&G their stuff has always been top rate and worked correctly.
__________________
Ignorance of the laws of physics does not mean they do not apply to you.
29AVEE8 is offline   Reply With Quote