Re: Rebuilt Flathead Problems.
I wonder just what cam your using? The chevy valve is longer than the ord valve and is used oNLY when installing a hi lift cam. You also would have to remove some material from the top of the guide to get at the adjusting nut on the lifter.
Now back to the chevy valve with the two groves. How many of you have used the upper grouve and had a problem, or dod somebody just say it doesn't work. I've used the upper grouve a number of times, and so fare their still running. Just "Fake news". Yes an old scale and a stop in a drillpress will check all the springs in a hurry. I can see why is easier and cheaper to install a SBC here, with all this miss information
|