[GordonC]

pooch I poured oil into the engine via the remote oil filler lines as well as filled the oil filter before hand. I then pulled all the plugs and cranked it over to see if I got pressure to the gauge. Good news was I was able to see oil feeding up the line to the gauge. Bad news was I was never able to get it to fire to check and see what I had for pressure. I do know having pulled the intake there seems to be plenty of oil splashed around in the galley. Ill also rock the engine as suggested and see what happens with the valves on #6.

As for the valve springs on properly or not that might be on me as when I redid the guides I reassembled the valve assemblies. In looking at them I did not see any difference but put them back the way I thought I found them. I can correct this if it has any bearing on this problem.