The Ford Barn - View Single Post

yjwrangler95 · 08-13-2014, 07:59 AM

I tried to do it myself without buying the Casewell kit. I used vinegar, 99.9% nickel welding rod with the flux removed, salt, and a 6 volt battery charger. It started to work pretty well, but I think i was using to much current or had to much salt in the solution. With more trial and error I think i could get it to work well. I found the "recipe" online. I'm sure the Casewell kit works well.

08-13-2014, 07:59 AM	#28
yjwrangler95 Member Join Date: Jul 2014 Location: Louisville KY Area Posts: 32	Re: 1928 Ford Phaeton/Huckster I tried to do it myself without buying the Casewell kit. I used vinegar, 99.9% nickel welding rod with the flux removed, salt, and a 6 volt battery charger. It started to work pretty well, but I think i was using to much current or had to much salt in the solution. With more trial and error I think i could get it to work well. I found the "recipe" online. I'm sure the Casewell kit works well.