Quote:
Originally Posted by 1930artdeco
Here are two more questions:
1) I need to get a balancer pulley to get the front pulley off, got it-does the back/inner pulley come off the same way? I.E. with the two threaded bolts?
|
Yes, the damper holes are used (PASS CAR) with a puller to remove the damper. An install tool is nice to press it back on. The method(s) are shown in the SHOP MANUAL.
Quote:
2) what is the best way to get my dead auto granny out?
I don’t think removing the cross member is in the cards without soaking the member is kroil for about a month or three. I have an idea brewing that uses my hoist but I wanted to see what you all say first.
Mike
|
The easiest way was to remove it with the engine pull. I can think of no safe way to remove it now without it's coming out of the underneath of the car.
__________________
*****
- WHY IS IT ... 
-
... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag?
WONDERING IN W(BY GOD)V ...
DIAGNOSED CDO - (OCD In Correct Alphabetical Order)