[shew01]

Originally Posted by Ruth

I would try to find out why it is not fitting before using an O ring. I asked earlier, didn't an adapter come with the gauge? They usually do.

IF you are going to go the O ring route, check on McmMaster-Carr (or similar for the best O ring for your application). https://www.mcmaster.com/o-rings

This is the gauge I use. https://www.speedwaymotors.com/Stewa...Inch,7150.html

Sorry, I didn’t see your post. This is my gauge.



The adapter came with the water spout, not the temperature gauge. There is a second port in the water neck that would accept the probe without the adapter, but the probe is too long and hits the thermostat.

Sent from my iPhone using Tapatalk